Browse to the location where the firmware was saved and click OK. The following link may also be helpful: See, I kin still Corp-speak This will be easy to maintain as I am the only one doing it. Razer’s Sila gaming router packs all the perks in its trademark black box. If you lost the software, you should be able to find it on the web somewhere.

Uploader: Mikatilar
Date Added: 1 March 2018
File Size: 55.39 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 27872
Price: Free* [*Free Regsitration Required]

Once you have logged into the Dlink DPU print server you should see the page below. Given that there is no reset button on the DPU, resetting can be frustrating, especially if it’s asking you for a password that you never created in the first place!

The status light on the D-Link router is flashing what is it indicating?

With its compact size, the DPU can easily be placed anywhere! This should enable colour printing for you. DPU forgot You can reset the router to factory default settings, press the reset button at the back of the router. On the left-hand side, under Setup, click “Wireless Setup” 2. It worked for me and hope it works for you.

In farm country, forget broadband. EtherTalk, Ethernet, Fast Ethernet. But other strange things happen too. When I use the word dp-300 I am referring to a cycle in the power of the device. Posted on Oct 17, Be the first to answer. Storage by Rick Broida Nov 12, Yes, it’s happened to the best of us.


If you lost the software, you should be able to find it on the web somewhere. Please note that, after resetting the router you should be able to see the router and connect to it d-lino LAN Cable or Wirelessly as the router automatic assigns the IP Address and gateway etc.

Discussion threads can be closed at any time at our discretion. If you need more help post back! This means you will lose all of the changes you made since you got the router.

D-Link DP 300U – print server Series

Then it ask for user name and password. Using Web browsers on a PC connected to the network, configuration is simple and straightforward with the familiar D-Link interface. Thanks for using FixYa. Let me know if you need further assistance. Environmental Parameters Min Operating Temperature. Where could i have gone wrong?

D-Link DPU – print server Overview – CNET

If it demands a password, and you don’t know it, try “SYSxxxx” where xxxx is the last four digits of the MAC address written on the underside of your server 4 Dust off your Quick Install Guide and go through the unintuitive configuration process. This is accomplished by using the default IP address. If you don’t have the psadmin software you may be able to download it off the internet. Please assign your manual to a product: The Western Digital Elements has rarely been this cheap.


Try to go to Choose a Network Key – it can be anything, as long as it’s characters in length 4. When I use the word reset I am talking about a complete factory restore of all settings. Also, when I added my little print server not the one you have, but probably similiar in functionthe port configuration got set to RAW and my gizmo needed an LPR data-stream for it to see the printer properly, so I had to change the setting from RAW to LPR and then give it some Que name, which I used iP…and it began to connect immediately.

Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively.